ORDERS OVER $100 FREE SHIPPING!
All in stock orders will ship next day. USPS Shipping costs will be calculated at checkout, costs are calculated based on product weight. Larger boxes may be shipped UPS to reduce costs. Pre and special orders have a lead time of 1-2 weeks to ship.
Reflex Racing RX28D Gen 3 – Kit & wheel combo deal
RX28D Gen 3 – 1/28 Scale RC Car Chassis Kit
Redefine Performance. Precision. Possibility.
The RX28D Gen 3 is here to raise the bar for 1/28-scale RC racing. Built for drivers who demand speed, agility, and pinpoint control, this third-generation chassis is fully re-engineered to dominate the track with cutting-edge design and next-level adjustability.
🔧 Key Upgrades & Features
🚗 Front-End Enhancements:
- 1mm longer front arms for improved stability and smoother handling
- Integrated sway bar system for surgical cornering precision
- Adjustable caster (via 3 screws)
- Integrated front shock tower with shim-based ride height tuning
- Upper arm hinge pin height adjustment for custom camber gain and roll center
- Lightweight & durable plastic knuckles – new design, less weight, more strength
- Low-profile big bore shocks & springs – ultra-smooth, responsive handling
🏁 Rear-End Innovations:
- Lower CG Rear End for high-speed stability
- New motor mount – lowers motor by 0.8mm
- 3-screw damper mount – simplifies rear suspension servicing
- Tweak brace lowered by 1.25mm for improved response
- Shorter side springs + thinner perches
- Side dampers lowered by 3mm, now screw-mounted to motor mount
- Smaller center shock spring, collar, and perch
- Pinned rear motor pod plate – boosts durability and rear-end precision
🛠️ Ease of Maintenance:
- Standardized ball stud hardware used throughout
- Simplifies adjustments and part replacements
- Designed with trackside tuning in mind
📦 What's Included:
- RX28D Gen 3 Chassis Kit
- One set of wheels and tires (pre-mounted)
⚠️ Note: Electronics NOT included. See below for compatibility.
📏 Specifications:
- Wheelbase: 98mm
- Weight (RTR): 145g–170g (depending on body & electronics)
- Rear Track Width: 69mm–78mm
- Front Track Width: 72mm–75mm
🔌 Electronics Required (Not Included):
- Motor
- LiPo Battery
- ESC (Electronic Speed Controller)
- Receiver
- Servo
✅ Compatible Servos:
- Reflex Racing RRE007 (20T Spline) – Recommended
- AGFC A06CLS V1
- GL Racing Servo
- PN Anima
- Atomic Servo (tight fit, but compatible spline size)
🛠️ You Will Also Need:
- Body + Mounting Hardware
- Compatible electronics listed above
🚨 NOTE:
ELECTRONICS ARE NOT INCLUDED! This kit is designed for experienced builders who want a customizable, high-performance platform.
Reflex Racing RX28D Gen 3 – Kit & wheel combo deal
RX28D Gen 3 – 1/28 Scale RC Car Chassis Kit
Redefine Performance. Precision. Possibility.
The RX28D Gen 3 is here to raise the bar for 1/28-scale RC racing. Built for drivers who demand speed, agility, and pinpoint control, this third-generation chassis is fully re-engineered to dominate the track with cutting-edge design and next-level adjustability.
🔧 Key Upgrades & Features
🚗 Front-End Enhancements:
- 1mm longer front arms for improved stability and smoother handling
- Integrated sway bar system for surgical cornering precision
- Adjustable caster (via 3 screws)
- Integrated front shock tower with shim-based ride height tuning
- Upper arm hinge pin height adjustment for custom camber gain and roll center
- Lightweight & durable plastic knuckles – new design, less weight, more strength
- Low-profile big bore shocks & springs – ultra-smooth, responsive handling
🏁 Rear-End Innovations:
- Lower CG Rear End for high-speed stability
- New motor mount – lowers motor by 0.8mm
- 3-screw damper mount – simplifies rear suspension servicing
- Tweak brace lowered by 1.25mm for improved response
- Shorter side springs + thinner perches
- Side dampers lowered by 3mm, now screw-mounted to motor mount
- Smaller center shock spring, collar, and perch
- Pinned rear motor pod plate – boosts durability and rear-end precision
🛠️ Ease of Maintenance:
- Standardized ball stud hardware used throughout
- Simplifies adjustments and part replacements
- Designed with trackside tuning in mind
📦 What's Included:
- RX28D Gen 3 Chassis Kit
- One set of wheels and tires (pre-mounted)
⚠️ Note: Electronics NOT included. See below for compatibility.
📏 Specifications:
- Wheelbase: 98mm
- Weight (RTR): 145g–170g (depending on body & electronics)
- Rear Track Width: 69mm–78mm
- Front Track Width: 72mm–75mm
🔌 Electronics Required (Not Included):
- Motor
- LiPo Battery
- ESC (Electronic Speed Controller)
- Receiver
- Servo
✅ Compatible Servos:
- Reflex Racing RRE007 (20T Spline) – Recommended
- AGFC A06CLS V1
- GL Racing Servo
- PN Anima
- Atomic Servo (tight fit, but compatible spline size)
🛠️ You Will Also Need:
- Body + Mounting Hardware
- Compatible electronics listed above
🚨 NOTE:
ELECTRONICS ARE NOT INCLUDED! This kit is designed for experienced builders who want a customizable, high-performance platform.